科尔沁湿草甸参考作物蒸散发模拟分析     

李霞  刘廷玺  段利民  王冠丽  童新  周亚军  杨晓君 《中国沙漠》2020,40(2):134-143

为探明气候变化下干旱半干旱地区湿草甸参考作物蒸散发(ET₀)影响因子,使用FAO 56 P-M模型对科尔沁湿草甸ET₀进行模拟,利用涡度相关系统对模型的适用性进行评价,并通过通径分析及指标敏感性分析对ET₀的影响因子进行辨识。结果表明:(1)小时尺度模拟精度最高,日尺度次之,月尺度较差,小时尺度上晴、阴、雨3种天气条件下模拟效果不同,晴天最优,阴雨天较差。(2)ET₀年内变化呈单峰曲线状,生长季明显高于非生长季,集中在3—10月,占全年89.79%。生长季典型晴天ET₀逐小时分布特征遵循倒“U”单峰型变化规律。(3)通径分析结果显示,对ET₀的通径系数以及对回归方程估测可靠程度E的总贡献均表现为VPD(饱和水汽压差) > T_min(最低气温) > R_n(冠层表面净辐射)>u₂(2 m高度风速),即VPD为影响ET₀最重要的因子;指标敏感性分析中,在去除VPD后引起的E变化最大,说明ET₀对VPD的变化最为敏感,其次为u₂、T_min和R_n。  相似文献   

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献   

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS     

Jean‐Michel Brazier  Anne‐Dsire Schmitt  Eric Pelt  Damien Lemarchand  Sophie Gangloff  Tho Tacail  Vincent Balter 《Geostandards and Geoanalytical Research》2020,44(2):331-348

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.  相似文献   

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS     

Ya‐Jun An  Xin Li  Zhao‐Feng Zhang 《Geostandards and Geoanalytical Research》2020,44(1):183-199

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.  相似文献   

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry     

Katharina Marger  Matthieu Harlaux  Andrea Rielli  Lukas P. Baumgartner  Andrea Dini  Barbara L. Dutrow  Anne‐Sophie Bouvier 《Geostandards and Geoanalytical Research》2020,44(3):593-615

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).  相似文献   

利用水系沉积物高程定量恢复古地貌的技术方法——以鲁西白彦地区白彦砾岩为例          下载免费PDF全文

程光锁  于学峰  杨斌  胡戈  李兆营  周军  刘卫东  罗文强  马祥县 《山东国土资源》2019,35(9)

主要分析了构造抬升对水系和地形的影响和恢复,以从古生代灰岩围岩中大面积但零星出露的岩溶砾岩点为研究对象,对区域古水系和地形地貌恢复和反演做出了新的尝试。在收集资料和实测的基础上,尝试性探讨了利用稳定水体参照物高程反演抬升高度以及邻区山峰点的古高程、古水系,恢复区域上古地形地貌的技术方法。并以白彦地区为例,通过白彦岩溶砾岩的分布、产状、金刚石矿物含量、岩性等地质特征,恢复白彦地区古地形线、古水系位置和流向等古地理地貌,指出在白彦期时代,该区总体发育4个水系,邹城市大石墙水系、枣庄水系、平邑水系、费县水系,水系中金刚石含量较为丰富的砾岩点大多分布在凤凰山隆起中心,其中在平邑水系推测存在一个山地峡谷中的古湖泊。认为蒙山凸起中已知的常马庄地区的金伯利岩脉所含有金刚石可能主要供应平邑区水系,其他3个地区水系的金刚石可能来源于凤凰山及其东部隆起剥蚀地区。  相似文献   

有机化学物质碳氮稳定同位素系列标准物质研制     

李科  张琳  刘福亮  贾艳琨 《岩矿测试》2020,39(5):753-761

实验室和研究人员所使用的碳、氮同位素标准物质一般由国际原子能机构(IAEA)获得,然而近年来,随着碳氮同位素在实验室质量监控、方法评价、仪器校准等方面的广泛应用,市场需求量不断增加, IAEA研制的碳、氮同位素标准物质的种类与数量逐渐不能满足科学研究快速发展的需求。我国急需研制适应当今分析技术水平的有机质碳氮同位素国家标准物质用以进行质量监控、方法评价、仪器校准。为保证量值传递精度,本文研制了4个有机化学物质的碳氮稳定同位素标准物质,其中3个为尿素样品,1个为L-谷氨酸。经检验4种标准物质的均匀性通过F值检验,标准物质的δ~(13)C和δ~(15)N值经过一年的稳定性检验,特征量值变化在测量方法允许的不确定度范围内,由此判定δ~(13)C和δ~(15)N值稳定性良好。由包括研制单位实验室在内的12家实验室协同定值,采用高温燃烧-气体同位素质谱法测定了δ~(13)C和δ~(15)N值,系列标准物质δ~(13)C和δ~(15)N认定值区间呈梯度分布,δ~(13)C值为-40‰～0‰,δ~(15)N值为-10‰～30‰,涵盖了我国天然样品中有机质碳氮稳定同位素组成范围;研制的系列标准物质δ~(13)C的定值扩展不确定度不大于0.08‰,δ~(15)N的定值扩展不确定度不大于0.09‰,定值水平与国际标准物质相当。该系列标准物质已被国家质检总局批准为国家一级标准物质,批准号为GBW04494～GBW04497。可被用于地质、生态、环境等多种样品δ~(13)C和δ~(15)N比值测定时的分析监控、仪器校准、方法评价、质量保证和质量监控。  相似文献   

低压密闭消解-电感耦合等离子体发射光谱法测定地质样品中的硼     

杜宝华  盛迪波  罗志翔  王全 《岩矿测试》2020,39(5):690-698

采用酸溶-电感耦合等离子体发射光谱法(ICP-OES)测定地质样品中的全硼量,关键环节在于如何防止样品消解过程中硼元素的损失,降低测量过程中的基体干扰、光谱干扰和记忆效应。基于以上问题,本文采用氢氟酸-硝酸-高氯酸-磷酸在低压密闭溶样罐中消解样品,溶出的硼元素与少量磷酸充分络合,防止硼的挥发损失;以基体及主成分浓度与样品相类似的地质类固体标准物质绘制标准曲线做线性校准,有效匹配和降低样品的基体干扰;采用仪器自带的操作软件,观察分析谱线附近是否存在其他元素的干扰,来确定背景扣除最佳的位置及宽度,降低ICP-OES测量中的光谱干扰;以10%的王水作为进样系统的冲洗液,有效消减测量过程中的记忆效应。当稀释因子为200时,方法的检出限(3SD)为1.2μg/g,定量限(10SD)为4.0μg/g;用岩石、土壤及水系沉积物国家一级标准物质对精密度及准确度进行分析验证,11次测定相对标准偏差为1.8%～7.9%,相对误差为-3.6%～6.3%;以外检分析结果为参考,对硼含量在定量限以上的样品测定,相对误差为-9.3%～12.5%。  相似文献   

GBW10010a大米标准物质复(研)制及数据特征     

杨榕  顾铁新  潘含江  刘妹  周国华 《岩矿测试》2020,39(6):866-877

随着我国对生态文明建设的重视，自然资源综合调查势在必行，对生物标准物质亦提出了新的需求。当前相关调研工作已经大面积开展，自然资源综合调查、农产品与食品安全评价都需要对生物样品元素组成进行准确测试，需要以生物标准物质作为生物成分测试量值比对和溯源的基础，因此对生物基体标准物质的需求量大幅增加。大米作为主要粮食之一，其食品安全日益受到重视，对大米中的化学成分进行准确的分析测试具有重要的现实意义，因而对大米标准物质的需求量尤为突出，但目前大米成分分析标准物质已供不应求。本文严格按照《标准物质定值的通用原则及统计学原理》（JJF 1343—2012）和《地质分析标准物质的研制》（JJF 1646—2017）等相关规范要求，开展了GBW10010a大米成分分析标准物质的复（研）制工作，包括样品采集、加工制备、均匀性检验、稳定性检验、多家实验室协作定值测试及不确定度评定等关键环节。结果表明：本次复（研）制的大米标准物质定值成分多样、量值准确可靠，符合国家一级标准物质的要求。GBW10010a共定值54项主微量元素，包括Ag、Al、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cs、Cu、Dy、Er、Eu、Fe、Gd、Ge、Hg、Ho、K、La、Li、Ho、Mg、Mn、Mo、N、Na、Nb、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Sc、Se、Si、Sm、Sr、Tb、Th、Tl、Tm、U、V、Y、Yb、Zn，其中的39项元素给出了标准值及不确定度，包括Ag、Al、As、B、Ba、Ca、Cd、Ce、Co、Cs、Cu、Dy、Er、Fe、Hg、K、Li、Mg、Mn、Mo、N、Na、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Se、Si、Sm、Sr、Tb、Tl、Y、Yb、Zn；15项元素提供参考值，包括Be、Bi、Cr、Eu、Gd、Ge、Ho、Ho、La、Nb、Sc、Th、Tm、U、V。与原有GBW10010大米标准物质相比较，GBW10010a中As、Cd、Co、Cr、Cu、Hg、Mn、Mo、Ni、Zn等重金属元素含量显著下降，其中Cd、Cu、Zn降幅较大，分别下降约39%、43%、38.7%，一定程度上反映了农田生态环境的改善。本批标准物质定值元素总数量增加了6项，新增定值元素Ag、Nb（Nb给出参考值），并且各项元素不确定度范围整体上有所缩小，如Al、Cd、Cu、Fe、K、Mg、Mo、Na、P、Pb、Se、Zn等对生物易有影响的重要元素，表明了地质分析测试方法技术的进步及定值水平的提高。本批标准物质定值元素涵盖了具有生物效应的大部分主微量元素，适用于农业生态环境地球化学调查与评价、生物样品测试、农产品质量与食品安全评价样品测试时的分析仪器校正、分析方法评价和分析质量监控等多个领域。  相似文献   

First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources     

Aubry Vanderstraeten  Steeve Bonneville  Stefania Gili  Jeroen de Jong  Wendy Debouge  Philippe Claeys  Nadine Mattielli 《Geostandards and Geoanalytical Research》2020,44(2):307-329

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.  相似文献